วิธีการติดตั้ง และปรับแต่งอุปกรณ์ D-Link, Zyxel, LevelOne, NetGear
ให้รองรับการทำงานที่หลากหลายความต้องการ
โดย tom513 เมื่อ พุธ 26 ต.ค. 2011 1:07 am
D-Link DIR615 E3 มันอัพ DD-WRT ได้ไหมครับ ผมอัพหลายรอบแล้วมันอัพไม่ได้สักที
ไม่ทราบว่าต้องทัยังไงครับ
-
tom513
-
- โพสต์: 3
- ลงทะเบียนเมื่อ: พุธ 31 ส.ค. 2011 2:49 pm
โดย sys2u เมื่อ พุธ 26 ต.ค. 2011 8:03 am
tom513 เขียน:D-Link DIR615 E3 มันอัพ DD-WRT ได้ไหมครับ ผมอัพหลายรอบแล้วมันอัพไม่ได้สักที
ไม่ทราบว่าต้องทัยังไงครับ
-
sys2u
- Administrator
-
- โพสต์: 4716
- ลงทะเบียนเมื่อ: อังคาร 30 ก.ย. 2008 12:35 pm
- ที่อยู่: SYS2U.COM Bangkok, Thailand.
-
โดย tom513 เมื่อ พุธ 26 ต.ค. 2011 11:36 am
sys2u เขียน:tom513 เขียน:D-Link DIR615 E3 มันอัพ DD-WRT ได้ไหมครับ ผมอัพหลายรอบแล้วมันอัพไม่ได้สักที
ไม่ทราบว่าต้องทัยังไงครับ
มีเข้าใจว่ามันให้ทำยังไงครับอ่านภาษาอังกฤษไม่ออกช่วยแปลแล้วแนะนำขั้นตอนได้ไหมครับ
-
tom513
-
- โพสต์: 3
- ลงทะเบียนเมื่อ: พุธ 31 ส.ค. 2011 2:49 pm
โดย sys2u เมื่อ พุธ 26 ต.ค. 2011 12:42 pm
tom513 เขียน:sys2u เขียน:tom513 เขียน:D-Link DIR615 E3 มันอัพ DD-WRT ได้ไหมครับ ผมอัพหลายรอบแล้วมันอัพไม่ได้สักที
ไม่ทราบว่าต้องทัยังไงครับ
มีเข้าใจว่ามันให้ทำยังไงครับอ่านภาษาอังกฤษไม่ออกช่วยแปลแล้วแนะนำขั้นตอนได้ไหมครับ
จริงๆ แล้วก็ตามขั้นตอนนี้เลยอะครับผม
To install dd-wrt on a D-Link DIR-615 Revision E3, you can flash it directly from the router's web admin page (yes, that is correct... from D-Link's standard web interface). These are the steps to follow:
- Download the latest firmware from: http://dd-wrt.com/site/support/router-database , and enter the model as DIR-615. There will be two files, "dir615[revision]-factory-to-ddwrt-firmware.bin" and "dir615[revision]-firmware.bin". You only need the dir615[revision]-factory-to-ddwrt-firmware.bin file.
- ให้ใช้ firmware ตัว "dir615e3-factory-to-ddwrt-firmware.bin"
- Find out your magic hardware code. It is probably AP99-AR7240-RT-091105-01, but if you want to double-check, go to http://wrpd.dlink.com.tw/router/firmwar ... Ex_Default and download the firmware there. Look at the very end, and you'll see the code.
- ให้ตรวจสอบ HW Code ของอุปกรณ์นะครับ แต่เค้าก็แนะนำว่าน่าจะเป็น "AP99-AR7240-RT-091105-01" ผมลองเข้าไปเช็คตามลิงค์ที่ให้มาแล้ว ไม่เจอนะครับ ก็เอาอันนี้ไปแล้วกันนะครับ น่าจะใช้ได้ครับ เราก็จดไว้ครับ
- Edit the very end of the dd-wrt firmware file to match that code. You might need a "hex editor" to edit this file; I just used emacs.
- จากนั้นให้เข้าไปแก้ไฟล์ firmware ของ dd-wrt ครับ โดยใช้ hex editor เข้าไปแก้ครับ เค้าแนะนำให้ใช้ "emacs" ครับ โดยวิธีการก็คือ ใช้ emacs เปิดไฟล์ "dir615e3-factory-to-ddwrt-firmware.bin" จากนั้นไปที่บรรทัดสุดท้ายสุดของ firmware ครับ แล้วใส่ค่า "AP99-AR7240-RT-091105-01" เข้าไปที่ท้ายสุดของ code ครับ จากนั้นก็ save ครับผม
- Connect to the DIR-615 using an Ethernet cable.
- เสียบสายแลนเชื่อมต่อไปที่ DIR-615 ครับ
- Open http://192.168.0.1/ in your web browser (Firefox recommended), which should open the DIR615's administrative page from the standard D-link firmware.
- แนะนำให้ใช้ Firefox เข้าไปนะครับ
- The D-link's default login details are user "admin", password is blank.
- Tools -> Firmware - ไปที่เมนูตามนี้ครับ
- Click "browse" button -> select the "dir615e3-factory-to-ddwrt-firmware.bin" file -> click "Upload" button. - เลือกไฟล์ครับ จากนั้นก็กด upload เลยครับ
- Wait 2 or 3 minutes for the DIR-615 to flash and do the update. You will see a status page that shows you the progress as it happens. After the flash & update is done, the router will reboot to dd-wrt, and the IP address will have changed to 192.168.1.1. There is no need to reset. - รอไปเรื่อยๆ จนกว่า status bar จะเสร็จ 100% ครับ เมื่อเสร็จแล้วตัว DIR-615 จะ reboot ตัวเองครับ แล้วก็จะเปลี่ยนไปเป็น dd-wrt เลยครับ
- If it tells you that you've uploaded firmware for the wrong hardware, see instructions for D-link DIR 615C about this point. - ถ้า upgradeผิดตัว มันจะฟ้องออกมาเลยครับ
- Open http://192.168.1.1/ in web browser. Will probably have to update your IP address (if using static IP) to this subnet to be able to connect. This should open DD-WRT's web interface. Configure DD-WRT as desired.
- ถ้าผ่านเรียบร้อยก็เข้าไปหน้า dd-wrt ที่ 192.168.1.1 ได้เลยครับ
- You're finished! No need to 30/30/30 hard reset, but you can reboot your router after several minutes. (I don't know if it has to build anything in NVRAM, but better safe than sorry.)
- เท่านี้นะครับ น่าจะเสร็จแล้วครับ ลองดูนะครับ
-
sys2u
- Administrator
-
- โพสต์: 4716
- ลงทะเบียนเมื่อ: อังคาร 30 ก.ย. 2008 12:35 pm
- ที่อยู่: SYS2U.COM Bangkok, Thailand.
-
โดย tom513 เมื่อ พุธ 26 ต.ค. 2011 2:00 pm
ขอบคุณมากครับ
-
tom513
-
- โพสต์: 3
- ลงทะเบียนเมื่อ: พุธ 31 ส.ค. 2011 2:49 pm
โดย tumverone เมื่อ พฤหัสฯ. 08 ธ.ค. 2011 2:19 pm
อัพแล้วมันไม่มีโหมด repeater อะครับ
ทำยังไงดีครับ
แล้วถ้าอยากอัพกลับไปเป็นเหมือนเดิมทำยังไงหรอ
-
tumverone
-
- โพสต์: 3
- ลงทะเบียนเมื่อ: พฤหัสฯ. 08 ธ.ค. 2011 2:53 am
โดย sys2u เมื่อ พฤหัสฯ. 08 ธ.ค. 2011 10:29 pm
tumverone เขียน:อัพแล้วมันไม่มีโหมด repeater อะครับ
ทำยังไงดีครับ
แล้วถ้าอยากอัพกลับไปเป็นเหมือนเดิมทำยังไงหรอ
-
sys2u
- Administrator
-
- โพสต์: 4716
- ลงทะเบียนเมื่อ: อังคาร 30 ก.ย. 2008 12:35 pm
- ที่อยู่: SYS2U.COM Bangkok, Thailand.
-
ย้อนกลับไปยัง ปรับแต่งอุปกรณ์ D-Link, Zyxel, LevelOne, Netgear
กำลังดูบอร์ดนี้: ไม่มีสมาชิกใหม่ และ บุคคลทั่วไป 4 ท่าน